Description
⚡ Gecko Maelstrom MS-1 Spa Pump (0800-390001) — 3.0 HP Single Speed 230V 56-Frame | Gecko Custom Motor Jet Pump
Engineered to run at its sweet spot — outstanding performance in a compact, efficient design
♨️ Product Overview
The Gecko Maelstrom MS-1 (0800-390001) is a 3.0 HP single-speed jet pump from Gecko Alliance, featuring a brand-new Gecko custom-made motor engineered for optimal efficiency and compact design. Operating at 230V/60Hz with 12.0 Amps and a 56-frame (NEMA 56) motor, this pump delivers powerful hydrotherapy jet performance through 2″ MBT (Male Buttress Thread) center suction and 2″ MBT side discharge ports. Gecko Alliance, headquartered in Quebec City, Canada (450 des Canetons, QC, G2E 5W6), is one of the most recognized names in the spa industry, manufacturing both the Maelstrom and Aqua-Flo trademark pump lines along with their renowned spa control systems and keypads. The Maelstrom MS-1 was specifically designed to offer the best price-to-quality ratio on the hot tub aftermarket — dynamics between pump components are complex, and Maelstrom pumps are engineered to run at their sweet spot for optimal output. This pump comes complete with two white 2″ union nuts with 2″ slip tail pieces and O-rings, three wing nut drain plugs, and a 96″ (2.4m) cable with AMP plug — ready to install. Built with a longer-life capacitor rated for 85°C high temperature, sealed bearing motor, Gecko high-quality Universeal shaft seal (Viton), Class F insulation with thermal protection (155°C), and UL approval (E62386). The standard wet end position ships at 12 o’clock and can be rotated. Combined with Gecko’s renowned North American quality and customer service, the Maelstrom MS-1 delivers the best supply solution for spa pump replacements.
⭐ Key Features
3.0 HP Single Speed — 12.0 Amps @ 230V/60Hz — Full-power jet performance for demanding hot tub hydrotherapy systems with straightforward single-speed operation
Gecko Custom-Made Motor — Brand-new proprietary motor designed by Gecko’s engineering team for outstanding performance in a compact design
56-Frame (NEMA 56) Motor — Full-size motor for added strength, cooler operating temperatures, and longer motor life
Sealed Bearing Motor — Enhanced moisture resistance for longer life in humid spa environments
Gecko High-Quality Universeal (Viton) — Premium shaft seal engineered for hot tub chemical environments
Longer Life Capacitor (85°C Rated) — High-temperature rated capacitor for extended service life in hot environments
Class F Insulation — Thermally Protected (155°C) — Advanced insulation class with automatic thermal overload protection
PSC Construction (Permanent Split Capacitor) — Efficient single-speed motor design
Complete Installation Kit Included — 2× white 2″ union nuts with slip tail pieces and O-rings, 3× wing nut drain plugs, and 96″ AMP cord all included
Rotatable Wet End — Standard 12 o’clock position; can be rotated for flexible installation configurations
UL Approved (E62386) — Independently tested and approved for the North American market
High Ambient Temperature Rated (60°C) — Designed to operate reliably in elevated ambient temperatures common in spa equipment bays
⚙️ Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | Gecko Alliance (Quebec City, QC, Canada) |
| Product Line | Maelstrom MS-1 Series |
| Part Number | 0800-390001 |
| Horsepower | 3.0 HP |
| Speed Settings | Single Speed (1-Speed) |
| Voltage | 230V |
| Frequency | 60 Hz |
| Amperage | 12.0 Amps |
| Frame Type | 56 Frame (NEMA 56) |
| Motor Construction | PSC (Permanent Split Capacitor) |
| Motor Type | Gecko custom-made motor |
| Bearing Type | Sealed bearing |
| Discharge Location | Side |
| Discharge Size | 2″ MBT (Male Buttress Thread) |
| Suction Size | 2″ MBT (Male Buttress Thread) |
| Suction Style | Center |
| Outside Thread Diameter | Approximately 3-1/16″ (78mm) |
| Seal Type | Gecko high-quality Universeal (Viton) |
| Insulation Class | Class F (155°C) |
| Thermal Protection | Yes — automatic thermal overload protection |
| Capacitor | Longer life capacitor rated for 85°C high temperature |
| High Ambient Temperature Rating | 60°C |
| Maximum Water Temperature | 50°C (122°F) |
| Standard Wet End Position | 12 o’clock (rotatable) |
| Cord | 96″ (2.4m) cable with AMP plug — INCLUDED |
| Unions | 2× white 2″ union nuts with 2″ slip tail pieces and O-rings — INCLUDED |
| Drain Plugs | 3× wing nut drain plugs — INCLUDED |
| Certifications | UL Approved (E62386) |
| Country of Origin | Designed in Canada by Gecko Alliance |
⚠️ Motor Brand Note: Pump and motor manufacturers reserve the right to change motors or style of motor without notice. Functionality and specifications remain the same.
⚠️ HP Rating Note: When matching replacement pumps, always use amperage rather than horsepower. HP ratings on hot tub pumps are often listed using different rating methods (SPL-HP, BHP, MBHP, etc.) which do not represent the same thing as continuous operating horsepower.
