Description

The SHARKBITE CASH ACME U3088FLEX12LF is a 3/4-inch female iron pipe (FIP) x 12-inch braided water heater connector designed for residential and light commercial plumbing installations. The flexible connector features a stainless steel braid over the hose body with push-fit ends constructed of DZR brass. It is rated to 200 psi and 200 degrees F, and includes an integral tube liner. The push-fit end accepts copper tubing, CPVC, and PEX without soldering, cementing, or threading, making connection fast and repeatable for licensed plumbers and experienced service technicians.

This connector is used to link a water heater to the potable water supply line in residential and commercial applications. The 3/4-inch FIP thread on one end connects to the water heater nipple or shutoff valve while the push-fit end slides onto the supply tube. The 12-inch flexible length accommodates minor misalignment between the heater and the supply rough-in. It is certified for both potable and hydronic water distribution and is approved for underground applications as a manufactured joint without an access panel requirement.

Key Features

Push-fit connection compatible with copper, CPVC, and PEX tubing no solder or cement required
Rated to 200 psi and 200 degrees F for water heater service conditions
Stainless steel braid over flexible hose body with DZR brass push-fit fittings
Integral tube liner included for use with PEX and CPVC
Certified for underground applications as a manufactured joint no access panel needed
Lead free compliant per Federal Law 111-380

Compatibility

Compatible with copper tubing, CPVC, and PEX. Designed as an OEM-style water heater supply connector for 3/4-inch FIP inlet and outlet connections on residential and light commercial water heaters.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the IPC, UPC, or locally adopted plumbing code. Shut off the water supply and drain the line before removing or installing the connector. Do not overtighten the FIP threaded end use appropriate thread sealant and hand-tighten plus a quarter turn with a wrench. Verify the push-fit tube end is fully seated by pulling back on the tube after insertion to confirm the collet has engaged.

Technical Specifications

Connection Type: 3/4 inch Female Iron Pipe (FIP) x Push-Fit
Hose Length: 12 inches
Maximum Pressure: 200 psi
Maximum Temperature: 200 degrees F
Hose Material: Stainless steel braid
Fitting Material: DZR brass
Package Quantity: 12
Weight: 5.64 pounds
Certifications: ASSE 1061, NSF 61, IAPMO, UPC, IPC, CUPC, Lead Free Federal Law 111-380