Description

The HAGER HINGE RC1741312ANEA14 is a full mortise, plain bearing hinge designed for residential door applications. Measuring 3.5 inches by 3.5 inches with a 1/4-inch radius corner, this hinge is surface-finished in antique nickel for a traditional aesthetic. Plain bearing construction suits standard residential door weights and moderate traffic levels. The hinge is sold individually and is installed by carpenters, general contractors, or skilled DIYers performing door hardware replacement or new door installation. At 0.4 pounds, it is lightweight and easy to handle during installation.

This hinge is suited for residential interior and exterior door installations where a full mortise configuration is required. Full mortise hinges are recessed into both the door edge and the door frame, producing a flush, clean fit. The antique nickel finish integrates well with traditional and transitional door hardware sets. Typical applications include passage doors, bedroom doors, and closet doors in residential construction or renovation projects.

Key Features

Full mortise design for flush, recessed installation in door edge and frame
3.5 x 3.5 inch leaf dimensions with 1/4-inch radius corners
Plain bearing construction appropriate for standard residential door weight and frequency
Antique nickel finish for traditional and transitional hardware compatibility
Lightweight at 0.4 pounds for easy single-person handling
Sold individually, allowing quantity purchasing to match exact project needs

Compatibility

Designed as an OEM-style replacement or new-installation hinge for standard residential full mortise door applications requiring a 3.5 x 3.5 inch hinge with a 1/4-inch radius corner profile.

Installation Notes

Installation is performed by a carpenter or qualified door hardware installer. Power down any associated electric hardware and ensure the door is properly supported before removing existing hinges. A sharp chisel and router are typically used to cut or clean the mortise pocket to the correct depth for a flush fit. Follow local building codes for door hardware requirements where applicable.